TIANLICHUJU — PERSONAL VERIFICATION WORKSHEET
A flush kitchen that can still be repaired
https://tianlichuju.com/journal/a-flush-kitchen-that-can-still-be-repaired/

PROPOSED CHECKS — NO MEASURED RESULTS SUPPLIED
Date: __________________  Units: __________________
Room / product reference: __________________

1. Service-point register
Where: On the proposed cabinet plan at plumbing connections, isolating controls, equipment, and lighting components.
Record: Number each concealed item and identify the opening or removable section needed to reach it; flag locations without an agreed method.
Your observation: ______________________________________________
Interpretation: The register exposes missing coordination, but a homeowner's drawing cannot establish safe technical access or required ventilation.
Alternative: Leave the affected detail unapproved until the relevant installer resolves it, or use a simpler nonintegrated arrangement.

2. Appliance exit path
Where: From the appliance enclosure across the final floor, past fronts and plinths, and around the island.
Record: Trace the manufacturer's removal sequence on the plan; record finished openings and obstructing projections in millimeters using the actual appliance specification.
Your observation: ______________________________________________
Interpretation: A traced path can reveal conflicts but cannot confirm concealed connections, lifting arrangements, or successful removal of installed equipment.
Alternative: Revise the panel, floor transition, or island position before an ordinary replacement would require damaging cabinetry.

3. Removable face detail
Where: At a representative access panel, its fixings, surrounding joint, and adjacent finished surfaces.
Record: Ask for a section showing the handling clearance, release sequence, and finishes disturbed during removal; retain component photographs at handover.
Your observation: ______________________________________________
Interpretation: The detail distinguishes planned access from a promise that someone will improvise later; it is not a performed repair demonstration.
Alternative: Increase the deliberate reveal or use a standard accessible front if the proposed face cannot come away intact.

PRACTICAL TRIAL
1. Coordinate ventilation requirements with the actual appliance models before finalizing the elevation.
2. Ask who can remove each lighting driver without dismantling a finished fascia.
3. Review access with final flooring and all adjacent furniture represented.

COMPARE THE SAME SCOPE
- Appliance enclosure and complete removal route
- Documented removable panels and service openings
- Installation adjustment, ventilation coordination, and making good
Cost drivers: Tight reveals requiring custom access construction; Service relocation behind retained cabinetry; Floor or island changes needed for removal
Choose another route when: Seamless integration is unsuitable when it traps equipment, obscures necessary controls, or relies on cutting finished surfaces for foreseeable maintenance.

EVIDENCE BOUNDARY
No appliance has been removed or installation certified. This proposed access audit makes unresolved details visible without replacing manufacturer requirements or competent technical review.

PHOTO REFERENCE
A shallow drawer reveals several rectangular compartments, with product labels and a measuring tape visible nearby.
https://commons.wikimedia.org/wiki/File:IKEA_Elizabeth_NJ_-_November_2021_-_19.jpg

DECISION CONDITIONS
choose: Choose integration when every concealed item has a documented access method, necessary ventilation is coordinated, and the appliance can leave its enclosure across the completed floor and room.
alternative: Use standard accessible fronts, a visible practical grille, or a simpler panel junction when these preserve the calm elevation without creating a bespoke maintenance trap.
stop: Stop approval if small repairs require cutting finished surfaces, equipment becomes trapped by an island or flooring, or essential technical details are still being omitted for appearance.

PUBLISHED REFERENCES
Bosch UK: Installing a Dishwasher
https://www.bosch-home.co.uk/en/c/spotlight/blta09b0c3012b87b34/customer-service/get-support/installation-hub/how-to-install-a-dishwasher
Bosch links integrated-panel movement to plinth clearance and requires access arrangements that allow maintenance. It expressly says installation methods vary by model. These details make the final floor, panel thickness, and nearby obstructions part of integration rather than unrelated finishing choices.
Scope: This Bosch guidance is an installation example, not an appliance-wide clearance rule or proof that a proposed enclosure is serviceable.
Photographer: Stilfehler
Licence: CC BY-SA 4.0 https://creativecommons.org/licenses/by-sa/4.0

Notes: ________________________________________________________